mail:christina at ecufocus.com

VOLVO Serial Diagnostic Cable

S40 S70 S90 V40 V70 V90 C70

PC based code reader and live data scan tool for Volvo cars including 800 Series, C70, S40, V40, S70, V70,

900 series, S90 and V90

Features:

New Design! 232 Chipset based design

Works excellently volvo fault code reader 1.3 serial

version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming

Supported Software:

OnBoardDiagnostics Versions: 1.3

Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC

What can this interface be used for?

This interface (adapter) is used as an interface and an Serial cable to connect a volvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from Volvo FCR. Volvo FCR is a software program that turns your PC into a sophisticated Volvo diagnostic tool.

Product Features and Benifits:

占쏙옙/span>Supports Volvo FCR version 1.3 or older

占쏙옙/span>Precision-molded diagnostic connector made to fit all volvo vehicles, even those with "tight" trim around diagnostic socket

占쏙옙/span>LED light indicating communication status

占쏙옙/span>High quality UL certified Serial Cables (equivalent to CE)

占쏙옙/span>Built-in, Electronic Protection from the "Aftermarket Radio Problem"

What is Volvo FCR?

Volvo FCR is a Windows-based Diagnostic Software for Volvo that emulates the functions of the dealers' very expensive proprietary scan tools. As the first aftermarket Volvo-Tool, it has the following features:

Volvo control module coverage includes:

占쏙옙/span>Engine - Petrol and Diesel

占쏙옙/span>ABS

占쏙옙/span>Automatic transmission

占쏙옙/span>SRS - airbag and other protection systems

占쏙옙/span>Driver and passenger seat memories

占쏙옙/span>Instruments, including service light reset

占쏙옙/span>Climate control - air conditioning

占쏙옙/span>Immobilizer

占쏙옙/span>Alarm

占쏙옙/span>Road traffic information

占쏙옙/span>Additional heater

How to Use?

占쏙옙/span>For laptops and PCs, download the shareware 1.3

占쏙옙/span>Run it and follow the prompts to allow it to install itself.
Note: You must install volvo FCR on your PC's hard disk -- it will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.

占쏙옙/span>Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232) (or USB port ) on your PC and the other end directly into the OBD-II port present  passenger vehicles.

占쏙옙/span>Turn the car's ignition switch ON. No need to start the engine.

占쏙옙/span>Start the Volvo  program,

占쏙옙/span>Now it works. Make sure the software can reliably access all the control modules that it should in your car.

What are the system and computer requirements?

占쏙옙/span>A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC's, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.

What are the system and computer requirements?

占쏙옙/span>A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC's, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.